Siemens FST020 - Logging Interval; Process Values

Maintenance and diagnostics
4.7 SensorFlash
FST020 Function manual
158 Function Manual, 09/2017, A5E42949526-AA
4.7.5.3
Logging interval
Description
Defines the interval for logging. Granularity is 10 ms.
Setting 10 ms; 20 ms; 100 ms; 200 ms; 500 ms; 1 s; 5 s; 10 s; 15 s; 30 s; 1 min; 5 min; 15 min; 30
min; 1 h; 2 h; 4 h; 6 h; 12 h; 24 h
Default
5 s
Related
Path
Maintenance and diagnostics → SensorFlash → Data logging → Logging interval
4.7.5.4
Process values
4.7.5.4.1 Logging value 1...20
Description
The process value to be logged can be selected in this parameter.
Logged process values are an indicator that you have to stop logging before you can change
the logged process values.
Setting
Disabled; Volume flow; Mass flow; Sound velocity; Flow velocity; Density; Medium temper-
ature; Kinematic viscosity; Totalizer 1
Default
Disabled
Related
This parameter is only available if
Data logging
is enabled.
Path
Maintenance and diagnostics → SensorFlash → Data logging → Process values → Logging
value 1...20