Siemens FST020 - 4 Th Process Value

Setup
3.12 View 5
FST020 Function manual
112 Function Manual, 09/2017, A5E42949526-AA
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 5 → 3rd value
3.12.6
4th process value
Description
The display
4th Process Value
can be selected.
Setting Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Default
Volumeflow
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 5 → 4th Process Value
3.12.7
5th process value
Description
The display
5th Process Value
can be selected.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium temperature
Default
Totalizer 1
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 5 → 5th value
3.12.8
6th process value
Description
The display
6th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Default
Totalizer 1