Siemens FST020 - Medium Temperature; Units; Decimal Places; Alarm and Warning Limits

Setup
3.2 Process values
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
55
Setting
0.00 m²/s to +9999997952 m²/s
Default
0.00 m²/s
Related
Path
Setup → Process values → Kinematic viscosity → Alarm and warning limits → Hysteresis
3.2.7
Medium temperature
3.2.7.1
Units
Description
Select units for displayed temperature. Units are not applied at communication interface.
Setting
°C (degrees Celsius); °F (degrees Fahrenheit); °R (degrees Rankine); K (kelvins)
Default
°C (degrees Celsius)
Related
Path
Setup → Process values → Medium temperature → Units
3.2.7.2
Decimal places
Description
Sets the decimal places for the process value displayed in the local display.
Setting
Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
Default
2 decimal places
Related
Path
Setup → Process values → Medium temperature → Decimal places
3.2.7.3
Alarm and warning limits
3.2.7.3.1 Upper alarm limit
Description
Exceeding this limit causes an alarm.