Setup
3.2 Process values
FST020 Function manual
54 Function Manual, 09/2017, A5E42949526-AA
3.2.6.3.2 Upper warning limit
Description
If process value exceeds this limit a warning is triggered.
-9999997952 m²/s to +9999997952 m²/s
Path
Setup → Process values → Kinematic viscosity → Alarm and warning limits →
3.2.6.3.3 Lower warning limit
Description
If process value falls below this limit a warning is triggered.
-9999997952 m²/s to +9999997952 m²/s
Path
Setup → Process values → Kinematic viscosity → Alarm and warning limits →
3.2.6.3.4 Lower alarm limit
Description
If process value falls below this limit an alarm is triggered.
-9999997952 m²/s to +9999997952 m²/s
Path
Setup → Process values → Kinematic viscosity → Alarm and warning limits → Lower alarm
3.2.6.3.5 Hysteresis
Description
Sets the hysteresis for alarm and warning limits. The hysteresis is the distance between the
limits for activation and deactivation of an alarm/warning.
To Next Page
Loading...
