Siemens FST020 - Trend Scale Upper Limit; View 4; Enable or Disable

Setup
3.11 View 4
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
105
3.10.13
Trend scale upper limit
Description
The
Trend Scale Upper Limit
defines the scaling upper limit of the value axis for the fixed
mode.
Setting options
Default setting
0
Related
This parameter is only available if
Trend Scale Mode
is set to Fixed.
Path
Setup → Display → View 3 → Trend Scale Upper Limit
3.11
View 4
3.11.1
Enable or disable
Description
In this parameter View 4 can be enabled.
Setting
Disabled; Enabled
Default
Enabled
Related
If Enabled is selected, all parameters for View 4 must be configured.
Path
Setup → Display → View 4 → Enable or disable
3.11.2
View
Description
The display View 4 can be configured.
Setting
Single value; Three values; Totalizer; 1 value and bargraph; 1 value and graph; Six values;
Six diagnostic values; Alarm list
Default
Six diagnostic values