Siemens FST020 - Inputs and Outputs; Channel 2 - Output

Maintenance and diagnostics
4.4 Diagnostics
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
145
4.4.2.2.5 Timestamp at maximum value (read only)
Description
Shows timestamp of recorded maximum transmitter internal temperature.
Path Maintenance and diagnostics → Diagnostics → Temperature monitoring → Transmitter elec-
tronics temperature → Timestamp at maximum value
4.4.3
Inputs and outputs
4.4.3.1
Channel 2 - output
4.4.3.1.1 Operation mode (read only)
Description
The set Operation mode can be viewed in this parameter.
Options Off; Current output
Default
Current output
Related
In this parameter the setting of
Operation mode
is read only.
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 2 - output →
Operation mode
4.4.3.1.2 Status output signal (read only)
Description
The channel value can be viewed in this parameter.
Related
if
Operation mode
is set to Current output, this parameter will show the current output value.
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 2 - output →
Channel value
Description
The error status of the channel can be viewed in this parameter.