Siemens FST020 - Trend Scale Upper Limit; View 2; Enable or Disable; View

Setup
3.9 View 2
FST020 Function manual
96 Function Manual, 09/2017, A5E42949526-AA
3.8.12
Trend scale upper limit
Description
The
Trend scale upper limit
defines the scaling upper limit of the value axis for the fixed
mode.
Setting options
Default setting
0
Related
This parameter is only available if
Trend scale mode
is set to Fixed.
Path
Setup → Local display → View 1 → Trend scale upper limit
3.9
View 2
3.9.1
Enable or disable
Description
In this parameter View 2 can be enabled.
Setting
Disabled; Enabled
Default
Enabled
Related
If Enabled is selected, all parameters for View 2 must be configured.
Path
Setup → Local display → View 2 → Enable or disable
3.9.2
View
Description
The display View 2 can be configured.
Setting
Single value; Three values; Totalizer; 1 value and bargraph; 1 value and graph; Six values;
Six diagnostic values; Alarm list
Default
Single value