Siemens FST020 - Simulation; Simulation Inputs;Outputs; Channel 2 - Output

Maintenance and diagnostics
4.8 Simulation
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
159
4.8
Simulation
4.8.1
Simulation Inputs/outputs
4.8.1.1
Channel 2 - output
4.8.1.1.1 Operation mode
Description
Set the output functionality you want the channel to operate.
Setting
Off; Current output
Default
Off
Related
The setting of this parameter affects the setting options in parameter
Simulation value.
Path
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 2 -
output → Operation mode
4.8.1.1.2 Simulation
Description
Enables or disables simulation of channel 2 current output.
Setting
Disabled; Enabled
Default Disabled
Related
Only if this parameter is set to Enabled, then the setting of parameter
Simulation value
will
be relevant.
Path
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 2 -
output → Simulation
4.8.1.1.3 Simulation value
Description
Set the current value to be output on the channel when current output simulation is enabled.