Siemens FST020 - Page 169

Maintenance and diagnostics
4.8 Simulation
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
167
Setting
Various process alarms can be selected
Default
None selected
Related
This parameter is only available if
Simulation mode
is set to Simulate alarm (ID number).
Path
Maintenance and diagnostics → Simulation → Simulation alarms → Alarms → Process
alarms (1)
4.8.3.2.4 Process alarms (2)
Description
The simulation of single and multiple
Process alarms (2)
can be configured.
Setting
Various process alarms can be selected
Default
None selected
Related
This parameter is only available if
Simulation mode
is set to Simulate alarm (ID number).
Path
Maintenance and diagnostics → Simulation → Simulation alarms → Alarms → Process
alarms (2)
4.8.3.2.5 Process alarms (3)
Description
The simulation of single and multiple
Process alarms (3)
can be configured.
Setting
Various process alarms can be selected
Default
None selected
Related
This parameter is only available if
Simulation mode
is set to Simulate alarm (ID number).
Path
Maintenance and diagnostics → Simulation → Simulation alarms → Alarms → Process
alarms (3)
4.8.3.2.6 Process alarms (4)
Description
The simulation of single and multiple
Process alarms (4)
can be configured.