Siemens FST020 - Page 84

Setup
3.4 Inputs and outputs
FST020 Function manual
82 Function Manual, 09/2017, A5E42949526-AA
3.4.3.3.3 Frequency value high
Description
Upper frequency value. Upper nominal output range boundary.
Setting
0.0 Hz to 12500.0 Hz
Default
10000.0 Hz
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Frequency output → Frequency
value high
3.4.3.3.4 Frequency value low
Description
Lower frequency value. Lower nominal output range boundary.
Setting
0.0 Hz to 12500.0 Hz
Default
0.0 Hz
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Frequency output → Frequency
value low
3.4.3.3.5 Upper range value
Description
Sets value at 100% of measuring span and corresponds to Frequency value high.
Setting and Default are sensor specific, depending on the setting in Process value and
depending on the Units setting.
Setting
-10800000000.00 kg/h to +10800000000.00 kg/h
Default
+10800000000.00 kg/h
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Frequency output → Upper range
value
3.4.3.3.6 Lower range value
Description
Sets value at 0% of measuring span and corresponds to Frequency value low.