Siemens sinamics dcp - Page 304

Operation
7.8 Communication via EtherNet/IP (EIP)
SINAMICS DCP
302 Operating Instructions, 09/2019, A5E34382853K
TCP/IP Interface Object, Class code F5 hex
Table 7- 65 TCP/IP Interface Object – supported services
Environment
Service
Class
Get Attribute all
Get Attribute single
Instance
Get Attribute all
Get Attribute single
Set Attribute single
Table 7- 66 TCP/IP Interface Object – Class Attributes
Attribute ID
Service
Type
Name
1
get
UINT16
Revision
2
get
UINT16
Max Instance
3
get
UINT16
Num of Instances
Table 7- 67 TCP/IP Interface Object – Instance Attributes
Attribute ID
Service
Type
Name
Value/explanation
1 get UNIT32 Status Fixed value: 1 hex
1: Configuration acknowledged, by DHCP or
saved values
2 get UNIT32 Configuration
Capability
Fixed value: 94 hex
4 hex: DHCP supported,
10 hex: Configuration can be adjusted,
80 hex: ACD-capable
3 get, set UNIT32 Configuration
Control
1 hex: Saved values
3 hex: DHCP
4 get
UNIT16
Physical Link
Path Size (in WORDs); fixed value: 2 hex
get, set
Interface Configuration
5 get, set
STRING
Host Name
r61000 Name of Station
get, set
Select ACD
6 get, set
UNIT16
Last Conflict
Detected
Host Name Length
STRING -
10 get UNIT8 Close Other
Requests
local OM flash:
0: Disabled,
1: Enabled
11 get
UNIT8
Connection
Timeouts
local OM flash ACD Activity
UNIT8
local OM flash Remote MAC
UNIT8
local OM flash ARP PDU