Functions
2.42 Monitoring Functions
SIPROTEC, 7UM62, Manual
C53000-G1176-C149-7, Release date 03.2010
294
2.42.2.5 Information List
No. Information Type of In-
formation
Comments
68 Clock SyncError OUT Clock Synchronization Error
110 Event Lost OUT_Ev Event lost
113 Flag Lost OUT Flag Lost
140 Error Sum Alarm OUT Error with a summary alarm
147 Error PwrSupply OUT Error Power Supply
160 Alarm Sum Event OUT Alarm Summary Event
177 Fail Battery OUT Failure: Battery empty
181 Error A/D-conv. OUT Error: A/D converter
185 Error Board 3 OUT Error Board 3
187 Error Board 5 OUT Error Board 5
188 Error Board 6 OUT Error Board 6
190 Error Board 0 OUT Error Board 0
191 Error Offset OUT Error: Offset
193 Alarm NO calibr OUT Alarm: NO calibration data available
194 Error neutralCT OUT Error: Neutral CT different from MLFB
210 Err1A/5AwrongS1 OUT Err:1A/5Ajumper different from settingS1
211 Err1A/5AwrongS2 OUT Err:1A/5Ajumper different from settingS2
212 Err. TD1 jumper OUT Err: TD1 jumper different from setting
213 Err. TD2 jumper OUT Err: TD2 jumper different from setting
214 Err. TD3 jumper OUT Err: TD3 jumper different from setting
264 Fail: RTD-Box 1 OUT Failure: RTD-Box 1
267 Fail: RTD-Box 2 OUT Failure: RTD-Box 2
5010 >FFM BLOCK SP >BLOCK fuse failure monitor
5011 >FFM U< extern SP >FFM extern undervoltage
6575 VT Fuse Failure OUT Voltage Transformer Fuse Failure
To Next Page
Loading...
