Simplex 4005 Programming Instructions

6-1
This chapter provides information and aids to help you program the 4005 Fire
Alarm.
Use the following sheet as an aid when programming the 4005 Fire Alarm.
4005 SYSTEM PROGRAMMING WORKSHEET
PROJECT NAME:
DATE:
CUST. CONTACT:
BRANCH NO.:
ORDER NO.:
STR REP.:
SECTION 1
CHECK AS REQUIRED
GENERAL ALARM
ALARM VERIFICATION
WATERFLOW
SPRINKLER SUPERVISION (TAMPER)
SIGNAL CUTOUT 0-60 MINS.
SIGNAL SILENCE INHIBIT 0-60 MINS.
SIGNAL OPERATION (CHECK ONE)
MARCH TIME
SLOW MARCH TIME
TEMPORAL
CITY CONNECTION (CHECK ONE)
LOCAL ENERGY
FORM C
REVERSE POLARITY
ANNUNCIATOR REQUIREMENTS (CHECK AS REQUIRED)
SERIAL: LIST QUANTITY ON SYSTEM
HARDWIRED
SUPERVISION
SECTION 2
CHECK AS REQUIRED
SELECTIVE SIGNAL OPERATION
SELECTIVE RELAY CONTROL
SELECTIVE DOOR HOLDER RELAY CONTROL
SELECTIVE SWITCH OPERATION
CUSTOM FAN/DAMPER RELAY CONTROL
CROSS ZONING
NON-ALARM MONITOR POINTS
NON-LATCHING MONITOR POINTS (TRACKING)
AC POWER FAIL (CONTROL)
SCU/RCU MEMORY POINT MATRIX (ZONE
GROUPING)
ELEVATOR RECALL (ALT FLOOR) OPERATION
POINT TYPE
Continued on next page
Chapter 6
Programming Guides and Reference Information
Introduction
System Programming
Worksheet
Technical Manuals Online! - http://www.tech-man.com

Simplex 4005 Specifications

General

Brand	Simplex
Power Supply	24 VDC
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
Compatibility	Compatible with Simplex fire alarm control panels