Simplex 4005 Programming Instructions

2-33
To save changes anytime during programming, use the following steps:
1. To save the CFIG, press <Menu>, <Next> until [
3URJUDPPLQJ] is
displayed (A), and then press <Enter>.
2. Press <Next> or <Previous> until [6DYH&),*] is displayed (B), and
then press <Enter>.
A.
B.
C.
Figure 2-31. Typical Screens Used to Save Changes
Anytime During Programming
3. Press <Enter> to confirm your selection or <Exit/Clear> to cancel (C).
The 4005 downloads the edit buffer information to the 4005 program.
When the download completes, the 4005 performs a cold start .
Saving Editing Changes, Continued
Saving Changes Anytime
During Programming
),5(  683(59,625< 7528%/( 
0HQX >3URJUDPPLQJ@
),5(  683(59,625< 7528%/( 
3URJUDPPLQJ>6DYH&),*@
6DYLQJ&),*
3UHVV(17(5WR6DYH(;,7WR&DQFHO
Technical Manuals Online! - http://www.tech-man.com

Simplex 4005 Specifications

General

Brand	Simplex
Power Supply	24 VDC
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
Compatibility	Compatible with Simplex fire alarm control panels