Simplex 4005 - Appendix C Single Sheet Operating Instructions; Reference Instructions

2-37
3. Press <Next> or <Previous> to choose the option to change (B) and then
press <Enter>.
The focus brackets ( [ ] ) appear in the New: field (C) of the display.
Note: When initially setting an access level, the level in the ‘New:’ field
will reflect the ‘Current:’ field's setting.
4. Press <Next> or <Previous> to choose the new access level.
5. Press <Enter> to confirm your selection or <Exit/Clear> to cancel (D).
“Access Level is updated” is displayed when selecting Enter.
The 4005 comes with three default passcodes.
• 2000 = Level 2 access
• 3000 = Level 3 access
• 4000 = Level 4 access (causes a Simplex Service Mode Trouble)
Changing Access Level, Continued
Changing Access Level
(Continued)
Default Passcodes
Technical Manuals Online! - http://www.tech-man.com