Simplex 4005 Programming Instructions

2-30
To enable or disable the city circuits for the 4005, use the following steps:
1. Follow Steps 1 through 3 under Editing a Point Label.
2. Press <Next> or <Previous> to scroll through the menus until
[
6\VWHP2SWLRQV] is displayed (A) and then press <Enter>.
A.
B.
C.
D.
Figure 2-28. Typical Screens Used to Enable
City Circuit 1 and City Circuit 2
3. Press <Next> or <Previous> until [
(QDEOH&LW\&LUFXLW] or
[
(QDEOH&LW\&LUFXLW] is displayed (B) and then press <Enter>.
The focus brackets ( [ ] ) appear in the New: field (C) of the display.
4. Press <Next> or <Previous> to choose ON or OFF for a specific city
circuit and then press <Enter>.
Note: When initially setting a value for a System Option, all values in
the ‘New:’ field will reflect the ‘Current:’ field's setting.
5. Press <Enter> to confirm your selection or Exit to cancel (D).
“Option is updated” is displayed when selecting Enter.
City Circuits
Enabling City Circuit 1 and/or
City Circuit 2
),5(  683(59,625< 7528%/( 
3URJUDPPLQJ>6\VWHP2SWLRQV@
),5(  683(59,625< 7528%/( 
6\VWHP2SWLRQV>(QDEOH&LW\&LUFXLW@
&RQILJXUH&LW\&LUFXLW
1HZ>2))@  &XUUHQW2))
3UHVV(17(5WRFRQILUP(;,7WRFDQFHO
1HZ>21@  &XUUHQW2))
Technical Manuals Online! - http://www.tech-man.com

Simplex 4005 Specifications

General

Brand	Simplex
Power Supply	24 VDC
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
Compatibility	Compatible with Simplex fire alarm control panels