Simplex 4005 - Page 86

4-6
5. Create the following two sets of user lists:
Set of Lists Containing All Monitor Zones on each Floor
Zones Assign to List List Label
  VW)ORRU=RQHV%OGJ
  QG)ORRU=RQHV%OGJ
  UG)ORRU=RQHV%OGJ
  WK)ORRU=RQHV%OGJ
Set of Lists Containing All the Supply and Exhaust Fan Circuits for
the Floors Specified
Supply & Exhaust Fans Assign to List List Label
WKUX  UGWK)ORRU)DQV
  WK)ORRU)DQV
  VW)ORRU)DQV
WKUX  VWQG)ORRU)DQV
Add the following SMPL equations (see the To Start SMPL Programming
section of this publication):
Selective Relay Control - Equation 1 (Fire on the First Floor)
Equation Point Label
),5( VW)ORRU=RQHV%OGJ
(QGRI,QSXW
+2/'2))3UL VW)ORRU6XSSO\)DQ
+2/'213UL VW)ORRU([KDXVW)DQ
+2/'213UL QG)ORRU6XSSO\)DQ
+2/'2))3UL QG)ORRU([KDXVW)DQ
+2/'213UL UGWK)ORRU)DQV
(QGRI2XWSXW
Selective Relay Control - Equation 2 (Fire on the Second Floor)
Equation Point Label
),5( QG)ORRU=RQHV%OGJ
(QGRI,QSXW
+2/'2))3UL QG)ORRU6XSSO\)DQ
+2/'213UL QG)ORRU([KDXVW)DQ
+2/'213UL VW)ORRU6XSSO\)DQ
+2/'2))3UL VW)ORRU([KDXVW)DQ
+2/'213UL WK)ORRU)DQV
(QGRI2XWSXW
Continued on next page
SMPL Language Applications, Continued
Selective Relay Control for
Fan/Damper Operation
(continued)
Technical Manuals Online! - http://www.tech-man.com