10
Introduction
1 Introduction
This installation manual is intended for use by solar energy technicians and professional electricians,
as well as Solar-Log™ users. It should be noted that the installation and commissioning of the individual
components is only to be performed by properly trained specialists. Refer to Chapter 4 “Safety informati-
on” for more information.
The wiring for the devices is described in detail in the Component Installation Manual.
The Solar-Log™ must only be used by persons who have fully read and understood the manual before ins-
talling, operating and/or servicing the device.
Our product documentation is being constantly updated and expanded.
The current versions of the documents can be downloaded from our website:
https://www.solar-log.com/en/support/downloads
The descriptions in this manual refer to firmware version 3.6.0
Security in-
formation!
Update the Solar-Log™ immediately to firmware 3.6.0 build 89 to protect it from security
risks and define a user password.
To Next Page
Loading...
