Solar-Log 2000 - Fig.: Event Log; Fig.: the Event Log Is Being Loaded; Accessing Event Logs

199
Accessing Diagnostic values
17.3 Accessing Event logs
To access the Event logs menu, go to Diagnostic | Event logs.
The following mode is loaded when accessing the event logs.
Fig.: The event log is being loaded.
After the event log has been loaded, the window switches back to the normal view.
Fig.: Event log
The following settings are available from the four drop-down menus in this view:
•
Devices:
Under devices (default “All devices”), you can select individual devices or leave the default selection as is.