75
Installation
14.4.1 Carrying out the initial set up of the Solar-Log 250, 300, 1200 and
2000 (manually).
The initial configuration of the Solar-Log 250, 300 and 2000 is performed via a web browser. All of the
device connections need to be established and it is best to connect the Solar-Log™ to an Internet router.
All settings made at the initial startup can be changed later.
Procedure:
•
Enter the address http://solar-log in the address bar of the web browser.
•
A selection of display languages is displayed.
•
Select the desired Display Language.
•
The browser access control configuration window appears. Click on save after the defining the user
password.
•
Sign in by clicking on the log in button (bottom right).
•
Define the country and time zone. Click on “save.”
•
Select the installation parameters for the component detection. Click on “manual installation” or
“
start.”
•
After selecting “manual installation,” the Welcome screen with the interface configuration section
appears.
•
After selecting “start,” the detection is started. Once completed, the menu Yield data | System
information appears. Click on “
Configuration” in the configuration bar at the top.
•
The following menus have to be configured:
Internet
Network
Device
Plant and
System
To Next Page
Loading...
Need help?
General
