Solar-Log 2000 User Manual

218
Accessing Diagnostic values
17.8.3 Simulation Section
The configured control logics can be simulated under the Simulation tab to check if the logics are correct.
The simulation is always based on the the underlying calculated averages.
(See the example Figure: “Smart Energy - Simulation with EGO - Surplus Priority 1”)
Fig.: Smart Energy - Simulation with EGO - Surplus Priority 1

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal