217
Accessing Diagnostic values
Depending on the connected device and configured control logic the labels may be different and also the
values may vary (e.g. runtime and switching status can be saved, as well as charging states when a hybrid
or battery system is connected).
Note!
The selected section can be enlarged by clicking on the graphic and dragging it.
Certain days can be selected to be viewed with the
Date box. It is possible to scroll the dates back and
forth with the arrow buttons.
The individual values that are displayed at the top-left of the graph key can be explicitly displayed or hid-
den with a mouse click.
Basic View
The basic view can be activated with a button.
If this option is selected for a basic surplus rule in which all of the contacts are switched together only the
curves of the first contact are displayed in order to maintain a clear overview in the graphic.
There is the option to directly switch to the configuration of the Smart Energy switching group by cli-
cking on the arrow symbol
in the top right corner.
To Next Page
Loading...
Need help?
General
