215
Accessing Diagnostic values
•
Theoretical surplus [W]
The theoretical surplus is the amount that would be fed into the grid if no Smart Energy logic was
operating (including smart appliances). It is calculated accordingly: [(Production-Smart Energy
Production)-(Consumption Smart Energy Consumption)]. Current or average value.
The selection for “Measurement values for control logic” under Configuration | Smart Energy | Surplus ma-
nagement determines whether the current values or or average values are displayed for the status.
Priority List
The priority of the defined control logics are displayed under the Priority list. (See illustration: “Smart Ener-
gy Status (current)”)
Fig.: Smart Energy Status (current)
To Next Page
Loading...
