123
Configuration Menu
The following settings based on the market integration model 90/10 are displayed as an example in the
illustration "Tariff - Tariff settings:"
•
Date (when the calculation is applied).
•
Amount (the amount set for the 90% share).
•
Shares [%] (90).
•
Amount (the amount set for the 10% share).
•
Shares [%] (10).
After entering the information and saving the settings, the tariffs will be calculated with these values in the
Financial Overview. (Refer to the "
Finances" chapter in the User Manual for more information.)
Note!
The Percentage calculation can be freely defined to allow for different and future requi-
res to be easily implemented.
16.4.6 Defi ne electricity costs
You can define various electricity prices for the plant under the tab “Electricity Prices” for precise calcula-
tions. Since the prices may change, there is the option in this section to enter prices with a particular valid
date in the fields “Start Date” and “Rate [/kWh].” The Solar-Log™ can include this in its calculations (see
section “Finances”).
To Next Page
Loading...
Need help?
General
