Solar-Log 2000 User Manual

118
Configuration Menu
16.4 Confi guring Plant Data
The settings for the following sections are to be adjusted in the Plant menu:
•
General
•
Plant groups
•
Graphic
•
Forecast
•
Feedin tariff
•
Electricity costs
16.4.1 General
Plant information
The general plant information is to be entered in the plant information menu. This tab is only displayed
when Export and Backup is activated. These values need to be entered in the portal when Solar-Log WEB
Enerest™ or Solar-Log WEB Enerest™ Home are used.Plant name
•
Operator
•
Contact e-mail address
•
Installation
•
Location
•
Modules
•
Orientation
•
Inverter
•
Power output
Note!
The Forecast data from the portals Solar-Log WEB Enerest™ or Solar-Log WEB Enerest™
Home are only available after this data has been completely configured.
Environmental performance
The CO2 factor per kWh can be setup for each electricity tariff. The value is displayed in g/kWh. Contact
your power company for the exact number for this value. The default setting for this value is 700g/kWh.

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal