152
Configuration Menu
16.10.6 Smart Energy Surplus Management
The Surplus Management menu is divided into the following sub-sections:
•
Settings
•
Surplus priority
(See illustration: “Surplus management”)
Fig.: Surplus management
The following values can be defined in the Settings section:
•
Measurement values for control logic
•
Surplus offset [%]
•
Battery charging suspension (only displayed when a hybrid or battery system has been detected)
•
Battery discharging suspension (only displayed when a hybrid or battery system has been detec-
ted)
The following values for the control logic can be selected under Measurement values for control logic:
•
Current values
are the instantaneous values. For systems with constant measurements values (e.g. CHP as pro-
ducer), current values can also be used to react more quickly.
•
Average values
Average values compensate for power fluctuations and help the control logic to operate more stea-
dily.
To Next Page
Loading...
Need help?
General
