Solar-Log 2000 User Manual

62
Connecting accessories
12.11.1 Connecting the Allnet network power socket to the Solar-Log™
The Allnet socket has to be defined with the device detection function to connect to the Solar-Log™. From
the WEB interface of the Solar-Log™ go to
Configuration | Devices | Definition and select the device class
"Switch" with the blue plus symbol and then Allnet as the manufacturer followed by the type and number
of devices. Confirm the selection with OK and start the detection from the
Configuration | Devices | De-
tection
menu. Let the detection process run completely. After that, select the corresponding devices from
the
Configuration | Devices | Configuration menu, enter the IP address and perform the rest of the setup.
Click on save once everything is finished.

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal