Solar-Log 2000 User Manual

99
Configuration Menu
16.2.3 E-mail
The settings in this section serve as the basic configuration for sending e-mails via the e-mail client integra-
ted into the Solar-Log™. The Solar-Log™ can send e-mails in the following situations:
•
Daily yield overview
•
Inverter faults
•
Inverter failure
•
Deviation from target power
We recommend using the e-mail address provided by Solare Datensysteme GmbH for sending e-mails.
This is sent to you by e-mail as part of the portal registration process.
In addition, you also have the option of saving your own address.
Note!
Many e-mail providers have switched their servers to secure connections and now only
allow e-mail to be send via these secure connections. Users with such e-mail providers
have to adjust the settings in the Solar-Log according to the instructions from the provi-
ders.
Note!
The certificates from the following providers have been integrated to send e-mail via a
secure connection: GMX, WEB.DE, GMAIL and T-ONLINE. Other e-mail servers or certifi-
cates cannot be used.
E-mail settings section
Enter the settings for sending e-mail via the Solar-Log™'s e-mail client in this section. The data for the
boxes SMTP Server, SMTP user name, SMTP password and sender is in the confirmation message from the
portal registration. Enter this data in the corresponding boxes. Enter the recipient's e-mail address in the
corresponding box.

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal