Solar-Log 2000 User Manual

202
Accessing Diagnostic values
17.5 Accessing Feed-In Management
To access the Feed-In Management menu, go to Diagnostic | Feed-In Management.
Note
!
The menu Feed-In Management under Diagnostic | Feed-In Management only
appears if active power has been configured in the
Configuration | Feed-In Ma-
nagement
section.
Fig.: Feed-In Management - Control State

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal