Solar-Log 2000 User Manual

280
Faults
21 Faults
21.1 Restarting and resetting
21.1.1 Reset buttons
Effects of reset button:
•
Device is restarted (reset)
•
Factory settings are restored
The reset button is located on the top of the housing.
If the cover is in place, it must be removed to allow access to the reset button.
Fig.: Reset buttons
21.1.2 Reset
A reset is necessary if Solar-Log™ is no longer responding to inputs from control buttons or from the PC.
All settings made on the unit are maintained, as well as all data collected during run-time.
Note!
If the IP address is changed, Solar-Log™ restarts automatically when the new
address is saved.

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal