Solar-Log 2000 User Manual

91
Configuration Menu
Caution!
After sending the PUK code / super PIN, the PIN of the SIM card is reset to the one de-
fined in the
GPRS Settings | SIM PIN menu.
Status and Test section
The GPRS connection can be tested and disconnected with this function. The error codes displayed under
Last Error are „21.2.1 Fault messages GPRS“ explained.
The number of attempts for the day can be viewed in the field "
Previous Dial-in Attempts."
The count can be reset to 0 by clicking on the "
Reset" button.
Note!
The field "Previous Dial-in Attempts" and "Reset" button are only visible once the Limit
Dial-in Attempts function has been activated.
Note!
The dial-in Attempts count is reset once per day or also when the device has been re-
booted.

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal