DANGER
Risk of fatal injury from being run over if the truck
rolls away!
If the parking brake is faulty, park the truck safely.
Secure the truck to prevent it from rolling away.
– To do this, strictly adhere to the following instruc-
tions:
– If the parking brake cannot be applied auto-
matically or via the push button, perform an
emergency actuation of the parking brake.
See the section entitled "Emergency actua-
tion of the electric parking brake (variant)" in
the chapter entitled "Behaviour in emergen-
cies".
– If the parking brake cannot be applied via
the emergency actuation process, secure
the truck with wedges so that the truck can-
not roll away.
– Have the parking brake repaired by the au-
thorised service centre.
Message:
Parking brake cannot be applied
If the truck control unit detects a malfunction in
the parking brake, the truck cannot be switch-
ed off.
●
The message
Parking brake can-
not be applied
is shown on the dis-
play-operating unit.
●
The LED (2) on the push button (1) flashes.
●
A warning signal sounds.
NOTE
If it is necessary to switch off a truck with a
faulty parking brake, the section entitled
"Switching off the truck when the electric park-
ing brake is faulty" must be observed. It is es-
sential to secure the truck to prevent it from
rolling away.
6219_003-006_V2
Operation
4
Driving
21356368011531 EN - 01/2021 - 05
To Next Page
