– Take hold of the battery male connector by
its handle (1).
– Lift the joining plate (4).
– Pull out the battery male connector (2) from
the plug connection (3) on the truck and set
it down safely.
CAUTION
There is a risk of short circuit if the ca-
bles are damaged.
Do not crush the battery cable when
closing the battery door.
– Ensure that the battery cable does
not come into contact with the battery
door.
– Close the battery door.
1
2
3
4
6219_901-008
Operation
4
Connecting and disconnecting the battery male connector
392 56368011531 EN - 01/2021 - 05
To Next Page
Loading...
