NOTE
Battery replacement using a hand pallet truck
is allowed only if using the change frame per-
mitted for this purpose.
– For permitted combinations, observe and
comply with the following table.
Tray Battery type Battery change frame
315 Lead-acid battery, circuit B
56364206701
364 Lead-acid battery, circuit A
365
Lead-acid battery, circuit A 56364206708
366
Removing the battery
– Park the truck securely.
– Open the battery door.
CAUTION
Potential for damage to the battery male connector!
If the battery male connector is disconnected while
the truck is switched on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens the service life of the
contacts.
– Switch off the truck before the battery male con-
nector is disconnected.
– Do not disconnect the battery male connector
while the truck is switched on, except in an emer-
gency.
Operation
4
Replacing and transporting the battery
41956368011531 EN - 01/2021 - 05
To Next Page
