Lift mast
Code Unit Operating materials Specifications Dimension
(B)
Lubrication High-pressure
grease
ID no. 0147873 As required
Stop Play Min. 2 mm
(D)
Lift mast bearing Grease Aralub 4320
DIN 51825-KPF2N20
ID no. 0148659
Fill with grease until
a small amount of
fresh grease escapes
Screws for the lift
mast bearing
Torque wrench For further informa-
tion, refer to the
workshop manual for
the truck in question.
Load chains
Code Unit Operating materials Specifications Dimension
(C)
Lubrication High-load chain
spray
Fully synthetic
Temperature range:
-35°C to +250°C
ID no. 0156428
As required
Washer system
Code Unit Operating materials Specifications Dimension
System filling Screen wash Winter,
ID no. 172566
As required
Flame proof enclosure
Code Unit Operating materials Specifications Dimension
Gap Feeler gauge < 0.05 mm
Cover screws Torque wrench M5
M6
M8
M10
2.5 to 5 Nm
5 to 10 Nm
10 to 20 Nm
20 to 40 Nm
Column Grease Aluminium-saponi-
fied,
ID no. 0170761
As required
Truck control unit Desiccant
(hygro bag)
As required
Maintenance
5
General maintenance information
45956368011531 EN - 01/2021 - 05
To Next Page
Loading...
