9A-11 Wiring Systems:
C: Engine harness
No./Color Connective position No./Color Connective position
C01/GRY IAC valve C22/- Generator #2
C02/GRY IG Coil #1 C23/BLK Starting motor #1
C03/GRY IG Coil #2 C24/- Starting motor #2
C04/GRY Fuel injector #1 C25/GRY VSS (Vehicle speed sensor)
C05/GRY Fuel injector #2 C26/GRY Knock sensor
C06/GRY Fuel injector #3
C27/BLU (A/
T)
Input shaft speed sensor
C07/GRY Fuel injector #4
C28/GRY
(A/T)
Trans axle range sensor
C08/BLK or
GRY
CMP sensor
C29/GRY
(A/T)
Shift solenoid
C09/BLK ECT sensor
C30/BLK
(M/T)
Back-up light switch
C10/GRY EGR stepper motor C31/- Main fuse box
C11/BLK Throttle position sensor
C32/GRY
(IF EQPD)
Current sensor
C12/BLK MAP sensor C33/- Main fuse box
C13/BLK MAF sensor C34/N (A/T) TCM
C14/BLK EVAP canister purge valve C35/N (A/T) TCM
C15/GRY Heated oxygen sensor #1 C36/N Main harness (To E24)
C16/GRN Heated oxygen sensor #2 C37/GRY ECM
C17/BLK A/C compressor C38/- Weld splice
C18/N Oil pressure switch C39/- Weld splice
C19/BLU VVT solenoid C40/- Weld splice
C20/GRY CKP sensor C41/- Weld splice
C21/GRY or
BLK
Generator #1