Suzuki SWIFT 2005 User Manual

Engine Mechanical: 1D-14
Throttle Body Cleaning
S7RS0B1406008
Clean electric throttle body assembly referring to
“Throttle Valve Visual Check” under “Electric Throttle
Body Assembly On-Vehicle Inspection in Section 1C”.
Intake Manifold Removal and Installation
S7RS0B1406009
Removal
1) Remove cowl top plate referring to “Cowl Top
Components in Section 9K”.
2) Remove throttle body referring to “Electric Throttle
Body Assembly Removal and Installation”.
3) Disconnect MAP sensor coupler (1).
4) Disconnect the following hoses:
• Brake booster hose (2) from cylinder head cover
• Breather hose (3) from cylinder head cover
• PCV hose (4) from intake manifold
• EVAP canister purge valve hose (5) from intake
manifold
5) Remove hose clamp (6) from intake manifold.
6) Remove EGR pipe bolt (7) from EGR valve.
7) Remove stiffener (1) and ground terminal (2) from
intake manifold.
8) Remove intake manifold (1) with EGR pipe (2) from
cylinder head, and then remove their gaskets (3).
9) Remove EGR pipe from intake manifold, if
necessary.
6
2
1
3
5
4
7
I6RS0B141008-01
1
2
I6RS0B141010-01
3
2
1
I6RS0B141009-01

Suzuki SWIFT 2005 Specifications

General

Brand	Suzuki
Model	SWIFT 2005
Category	Automobile
Language	English