SVAN 948 USER MANUAL
4 - 81
For the second display after consecutive pressing of the <
>, <
> push-buttons there is a
possibly to see:
• CURRENT EXPOSURE, DAILY EXPOSURE, CURRENT DOSE, DAILY DOSE, EAV TOTAL TIME,
TIME LEFT TO EAV, ELV TOTAL TIME and TIME LEFT TO ELV in the case of the WBV mode and
• CURRENT EXPOSURE, DAILY EXPOSURE, EAV TOTAL TIME, TIME LEFT TO EAV,
ELV TOTAL TIME and TIME LEFT TO ELV in the case of the HAV mode.
The results are presented on displays as it is shown in the figures above and below.
The view of the displays in one profile presentation; the switching between the results in a HAV mode
• CURRENT EXPOSURE – indicates the value of EXPOSURE in duration of measurement; for
example (the text in second line on the right side indicates, that meter works in WBV or HAV mode):
• DAILY EXPOSURE - depends on CURRENT EXPOSURE and is calculated relatively to EXPOSURE
TIME, it is shown in the figures below:
• CURRENT DOSE - shows the dose of vibration in duration of measurement; for example:
• DAILY DOSE – is calculated relatively to EXPOSURE TIME, which is shown in the figures below:
To Next Page
Loading...