Svantek SVAN 948 - Removing All Files with Measurement Results from Memory - DELETE ALL

SVAN 948 USER MANUAL _
5 - 46
done pressing the <

>, <

> push-buttons. After pressing the <

> with <SHIFT> push-button the first
file is available and after pressing the <

> with <SHIFT> push-button - the last one is displayed. The
return to the FILE list is possible after pressing the <ESC> push-button.
The view of the displays during the execution of the DELETE operation
The name of the file is accepted and the file is deleted after pressing the <ENTER> push-button.
The message is displayed after the successful end of the operation. The instrument waits for the reaction
of the user (any push-button should be pressed except the <SHIFT> one) and after pressing a push-
button it returns to the FILE list.
The view of the displays after the execution of the DELETE operation
Removing all files with measurement results from memory - DELETE ALL
The DELETE ALL (path: MENU / FILE / DELETE ALL) position is used to remove all files from
memory. In order to enter this position the user has to select the DELETE ALL text in the FILE list, using
the <

>, <

> (or <

>, <

>) push-buttons and press the <ENTER>.
The view of the displays in the FILE sub-list with the DELETE ALL text highlighted (displayed inversely)
The instrument requests the confirmation of the operation after entering this position (after pressing
the <ENTER> push-button). The next pressing the <ENTER> push-button, when the NO option is
selected, causes the closing of the position and the return to the FILE list. The selection of the NO or
YES option is possible using the <

>, <

> push-buttons. The return to the FILE list is possible after
pressing the <ESC> push-button.
The view of the displays during the execution of the DELETE ALL operation