Svantek SVAN 948 - Removing All Files with Results from Buffers Memory - CLEAR BUFFER

SVAN 948 USER MANUAL _
5 - 48
The view of the displays before the execution of the DEFRAGMENTATION operation
The <ENTER> push-button pressing, when the YES option is selected and the instrument is not
performing the measurements, merges the memory. The presented below message is displayed in the
case when the operation is not required. The instrument waits for the reaction of the user (any push-
button should be pressed except the <SHIFT> one) and after pressing a push-button it returns to the
FILE list. The operation is not executed in a case when FREE SPACE is equal to TOTAL AVAILABLE.
The view of the display in the case when the DEFRAGMENTATION operation is not required
In the case when the DEFRAGMENTATION operation is performed, the following texts are
displayed (see below Fig. a and b).
The view of the displays during the execution of the DEFRAGMENTATION operation
In this time the instrument recovers the memory which was used by the deleted files, clears it and
merges in one block. The presented below message is displayed after successful memory merging (see
Fig. c). The instrument waits for the reaction of the user (any push-button should be pressed except the
<SHIFT> one) and after pressing a push-button it returns to the FILE list. The result of the
DEFRAGMENTATION operation is visible in Fig. c, while the state of the memory before the execution of
this operation is given in Fig. a.
a)
b) c)
The view of the displays with the state of the file’s memory (a), after the execution of the
DEFRAGMENTATION operation (b) and the state of the memory after the execution of the operation (c)
Removing all files with results from buffer’s memory - CLEAR BUFFER
The CLEAR BUFFER (path: MENU / FILE / CLEAR BUFFER) position is used to delete the whole
contents of the buffer’s memory of the instrument (all files are erased). It is not possible to leave any data