Svantek SVAN 948 - Controlling the Data Storing in the Instruments Memory - SAVE OPTIONS; Replacement of the Existing Files by the New Ones - REPLACE; Saving of the Filters to the RAM Memory - RAM FILE

SVAN 948 USER MANUAL
5 - 41
a) b)
The displays after the file’s name selection (a) and with the message if the REPLACE position is not active (b)
Controlling the data storing in the instrument’s memory - SAVE OPTIONS
The SAVE OPTIONS (path: MENU / FILE / SAVE OPTIONS) sub-list is used for the selection of the
options of data storing in the FLASH DISC memory of the instrument. The sub-list is opened after
pressing the <ENTER> push-button when the SAVE OPTIONS text in the FILE list is displayed inversely
(selected using the <

>, <

> (or <

>, <

>) push-buttons). The return to the FILE list is possible after
pressing the <ESC> push-button.
The view of the displays in the FILE sub-list with the SAVE OPTIONS text highlighted (displayed inversely)
It is possible to replace the existing in the memory file by the new with the same name (the
REPLACE position), to add to the results the statistics of the measurements (the SAVE STAT. position,
valid only for sound measurements) and to save automatically the results of the measurements (the
AUTO SAVE position). The position of the sub-list is changed after pressing the <>, <> push-buttons.
In order to confirm the selection the <ENTER> push-button has to be pressed. Such pressing closes also
the opened sub-list.
Saving of the files to the RAM memory - RAM FILE
The RAM FILE position enables the user to save the results of the measurement in the special file
at RAM memory (the name of the file is defined as a “RAMfile”). The activation or deactivation of the
RAM FILE position is done by pressing the <

>, <

> push-buttons. This option is useful when remote
reading is necessary; available values: [√
√√
√] or [ ].
The displays during the execution of the SAVE OPTIONS – the selection of the RAM FILE parameters
Replacement of the existing files by the new ones - REPLACE
The result of the attempt to save the file with the name which already exists in the memory depends
on the setting of the REPLACE position. It is possible to erase the old file and to save the new one with