SVAN 948 USER MANUAL
5 - 47
After pressing the <ENTER> push-button the instrument checks its current state. In the case when
the measurements are performed, the execution of the DELETE ALL operation is not possible. In such
case the message with the changing letters is displayed (see below) and the instrument returns after few
seconds to the list from which the DELETE ALL position was called.
The view of the displays with the message stating the reason for unfeasibility of the required operation
The <ENTER> push-button pressing, when the YES option is selected and the instrument is not
performing the measurements, deletes all existing files. In this case the following text is displayed (see
below Fig. a) where 35 denotes the number of blocks to be deleted. In this time the instrument recovers
the memory which was used by saved files and then clears it.
The view of the display during the execution of the DELETE ALL operation (a) and after the execution (b)
The message is displayed after the successful execution of the operation. The instrument waits for
the reaction of the user (any push-button should be pressed except the <SHIFT> one) and after pressing
a push-button it returns to the FILE list.
Memory merging - DEFRAGMENTATION
The DEFRAGMENTATION (path: MENU/ FILE/ DEFREGMENTATION) position is used to merge the
blocks of the memory which were released after the delete operation. In order to enter this position the
user has to select the DEFRAGMENTATION text in the FILE list, using the <
>, <
> (or <
>, <
>)
push-buttons and press the <ENTER>.
The view of the displays in the FILE sub-list with the DEFRAGMENTATION text highlighted
The instrument requests the confirmation of the operation after entering this position (after pressing
the <ENTER> push-button). The next pressing the <ENTER> push-button, when the NO option is
selected, causes the closing of the position and the return to the FILE list. The selection of the NO or
YES option is possible using the <
>, <
> push-buttons. The return to the FILE list is possible after
pressing the <ESC> push-button.
To Next Page
Loading...