9.3.1.4.1
Customization (Control Options)
Customer and country-specific settings can be determined in the menu
item 'Control Options'.
Options for customer requests
The parameter ‘Operation
Mode’ is used to set up the
MultiFlow for communication
with a TMC (Truck-
Management-Computer) or
OBC (On-Board-Computer).
The operation mode is set to
‘Std’ (Standard) by default. If no
TMC or OBC is connected to
the MultiFlow, ensure the
standard operation mode is
selected.
Under the option 'Save display'
you can define the length of time during which the discharged amount is
to remain in the display after termination of the discharge. The minimum
display period after which the screen is to be cleared is one minute and
the maximum settable time is 99 minutes.
The parameter 'Currency' opens a submenu explained in more detail
section “Notes on the Second Currency”.
The parameter 'Queries' opens a submenu explained in more detail in
chapter 9.3.1.4.6 "Payment mode query" / page 129 .
For some products a surcharge is applicable, e.g. transport duty. In order
not to forget this amount, it is automatically inserted into the invoice if
‘Add surcharge’ is set to 1. Since the surcharge is treated as a product,
a product code must be defined for the duty. This product code is entered
under ‘Default surcharge’.
The parameter Billing opens a submenu explained in more detail in
chapter 9.3.1.4.7 "Notes on Billing" / page 130 .
To Next Page
Loading...
