TeeJet Matrix Pro 570GS - Appendix B - Matrix Pro Gs Console Menu Settings

93
98-05273-EN R7
MATRIX
®
Pro 570GS
•
MATRIX
®
Pro840GS
HOMESETUPGUIDANCE FULL SCREENIMPLEMENT INTRODUCTIONGNSSRATE CONTROLAPPENDIX
APPENDIX B  MATRIXPROGS CONSOLE MENU SETTINGS
This appendix lists the Matrix Pro GS console’s menu settings, and
also provides the following:
• Settings available with an active job.
• Settings that can be made in the Matrix Pro GS console itself,
or using the Fieldware Link software.
• Settings that are included when exported to a prole from the
Matrix Pro GS console, or from Fieldware Link.
Symbol key
In the following tables, these symbols indicate whether settings are
available during an active job:
 Available during an active job
 Not Available during an active job
◄ Retained from console with prole
► Retained from Fieldware Link with prole
Configuration Settings
Configuration Settings
Available
with Active
Job
Can be edited in Saved to exported prole in
Matrix Pro
Fieldware
Link Matrix Pro
Fieldware
Link
Implement
Machine type ...........................................................................................
GNSS antenna height ..............................................................................
Implement type ........................................................................................
Symmetric implement layout ...................................................................
Number of implement sections ................................................................
Application/working width ........................................................................
Droplet size monitor .................................................................................




























◄





◄
Nozzle
selection
Current nozzle ................................................................
Nozzle preset ..................................................................








◄
◄
Applied alert .............................................................................................
Entry time ................................................................................................
Exit time ...................................................................................................
Allow BoomPilot in reverse ......................................................................
BoomPilot start mode ..............................................................................
BoomPilot icon .........................................................................................
Reverse signal delay ...............................................................................




























◄
◄
◄
◄
◄
◄
◄
Straight
mode
Implement in-line offset direction ....................................
Implement in-line offset distance ....................................
Implement lateral offset direction ....................................
Implement lateral offset distance ....................................
Overlap ...........................................................................
Delay on/off times ...........................................................






























Spreader
mode
Setup type: TeeJet ........................................................
Antenna to disks in-line offset distance ..........................
Implement lateral offset direction ....................................
Implement lateral offset distance ....................................
Overlap ...........................................................................
Delay on/off times ...........................................................
Spread offset distance ....................................................
Section offsets ................................................................
Section lengths ...............................................................













































Setup type: OEM ...........................................................
Antenna to disks in-line offset distance ..........................
Implement lateral offset direction ....................................
Implement lateral offset distance ....................................
Start/stop distances ........................................................
Section start/stop offsets ................................................






























Staggered
mode
Section 1 in-line offset direction ......................................
Section 1 in-line offset distance ......................................
Implement lateral offset direction ....................................
Implement lateral offset distance ....................................
Overlap ...........................................................................
Delay on/off times ...........................................................
Section offsets ................................................................



































Continued...