TeeJet Matrix Pro 570GS - Appendix A - System Configurations

91
98-05273-EN R7
MATRIX
®
Pro 570GS
•
MATRIX
®
Pro840GS
HOMESETUPGUIDANCE FULL SCREENIMPLEMENT INTRODUCTIONGNSSRATE CONTROLAPPENDIX
APPENDIX A  SYSTEM CONFIGURATIONS
The following diagrams are reective of typical Matrix Pro GS congurations. Due to the variety of possible congurations, this should be
used for reference purposes only.
Figure A-1: Matrix Pro GS with FieldPilot AutoSteering system
45-05626
Power/CAN/Data Cable
(included with
FieldPilot, UniPilot
or BoomPilot kits)
to power cable
to RS-232
Matrix Pro 570GS
Matrix Pro 840GS
Kit, RAM Mount w/Suction Cup
90-02349 (Matrix 570)
90-02700 (Matrix 840)
RXA-30 GNSS Antenna
RX520 GNSS Receiver
GNSS GLONASS Antenna
OR
Video Selector Module
FieldPilot AutoSteer System
Reverse Sense Module
Terminator
Droplet Size Monitor (DSM) Pressure Interface Kit
RealView Camera
to Matrix Console
TeeJet CAN Options
78
-08086 - Switch Fuction Module (SFM)
to Status
Switch
to section control valves
to section control valves
to power cable
from battery power (NOT USED)
to section control valves
to battery
78-05098 - Section Driver Module (SDM)
45-05897 - SDM 15 Section Harness