iCNC Performance
1-4 SAFETY INSTRUCTIONS Manual 0-5401
Meaning of symbols - As used throughout this manual: Means Attention! Be Alert! Your safety is involved.
Means immediate hazards which, if not avoided, will result in immediate, serious
personal injury or loss of life.
Means potential hazards which could result in personal injury or loss of life.
Means hazards which could result in minor personal injury.
Enclosure Class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration by solid objects or
water. Protection is provided against touch with a finger, penetration of solid objects greater than 12mm and
against spraying water up to 60 degrees from vertical. Equipment marked IP21S may be stored, but is not
intended to be used outside during precipitation unless sheltered.
This product is solely intended for plasma cutting. Any other use may result in per-
sonal injury and / or equipment damage.
If equipment is placed on a surface that slopes more
than 15°, toppling over may occur. Personal injury and
/ or signicant damage to equipment is possible.
°
Art# A-12726
Art# A-12736
To avoid personal injury and/or equipment damage,
lift using method and attachment points shown here.
To Next Page
Loading...
Need help?
General