Tonghui TH2840 Series - Page 167

159
0
Not Compare
1
Pass
Other
Fail
Trace
Sweep
Return to the test result of the current test point.
Clike index, parameter 1 result, parameter 2 result, parameter 3 result,
parameter 4 result,
such as: 2,1.12345E2,1.23456E-2,1.11023E2,-1.12345E2
Transformer
Single Test
Return to the test result of the current test point.
Serial number index, parameter name, parameter result comparison result,
such as: 2,lx,1.12345E2,1
The comparison results are as follows:
Compare
results
Description
0
Not Compare
1
Pass
Other
Fail
Scan
 Description: Query the test level monitoring results
Command systax:
:FETCh:SMON:VAC? ----Return to the voltage monitoring result
:FETCh:SMON:IAC? ----Return to the current monitoring result
Parameter:
Example:
9.2.16.2 Query list sweep results
 Description: Query trace sweep results
Command systax:
:FETCh:LIST:PARA<1|2|3|4>? ----Return to the test result of the specified parameter in list sweep
:FETCh:LIST:PT<1~201>? ----Return to the result of all parameters in the list at the specified point
Parameter:
Example:
:FETCh:TRACE:PARA1? ----Return to the test result of list sweep parameter 1
:FETCh:TRACE:PARA2? ----Return to the test result of list sweep parameter 2
:FETCh:TRACE:PARA3? ----Return to the test result of the list sweep parameter 3
:FETCh:TRACE:PARA4? ----Return to the test result of the list sweep parameter 4
:FETCh:TRACE:PT5? ----Return to the result of all parameters at point 5
9.2.16.3 Query trace sweep results
 Description: Query trace sweep results