Tonghui TH2840 Series - Main Menu Keys and Corresponding Displayed; Disp]; Setup]

10
The element composition of this page includes: title area, test condition area, 4 parameter result
display area, sorting result display area, menu area, title area, status bar.
2.4 Main menu keys and corresponding displayed pages
2.4.1 [DISP]
 When the LCR function is used, press this key to enter into the LCR measurement display page.
The function pages of this part are (use the "touch screen" to select the following page
functions, the same below):
<Meas Display>
<List Display>
<Trace Display >
<Save>
 When the transformer test function is used, press this key to enter into the transformer test
display page. The function pages of this part are:
<Save>
 When the transformer scan function is used, press this key to enter into the transformer scan
display page. The function pages of this part are:
<Pri.>
<Load Std>
<Deviation>
<Speed>
<Test Fail>
<Focus>
<Split>
<Save>
2.4.2 [SETUP]
 When the bridge function is used, it is used to enter the setting screen of the component test.
The function pages of this part are:
<Meas Setup>
<Limit Setup>
<List Setup>
<Trace Setup>
<User Corr>
<Handler>
 When the transformer test function is used, it is used to enter each setting screen of the
transformer test. The function pages of this part are:
<Single Setup>
<User Corr>