Tonghui TH2840 Series - User Setup

45
4.1.2 User Setup
4.1.2.1 Key Sound
Parameter type: enumerated
Parameter option
Description
OFF
Turn off the key sound.
ON
Turn on the key sound.
4.1.2.2 Pass Sound
Parameter type: enumerated
Parameter function: This area is used to control and display the sound mode when the measurement
comparison result of the instrument is qualified.
Parameter option
Description
OFF
Choose not to sound the alarm
Two short
Choose to emit two low and short alarm sounds
Low long
Choose to emit a low and long alarm sound
High short
Choose to emit a high and short alarm sound
High long
Choose to emit a high and long alarm sound
4.1.2.3 Fail Sound
Parameter type: enumerated
Parameter function: This area is used to control and display the alarm sound mode when the
measurement comparison result of the instrument is defective.
Parameter option
Description
OFF
Choose not to sound the alarm
Two short
Choose to emit two low and short alarm sounds
Low long
Choose to emit a low and long alarm sound
High short
Choose to emit a high and short alarm sound
High long
Choose to emit a high and long alarm sound
4.1.2.4 Language
Parameter type: enumerated
Parameter function: This area is used to control and display the operating language mode of the
current instrument.
Parameter option
Description