Choose English operating language
Choose Chinese operating language
4.1.2.5 Password
Parameter type: enumerated type + input type
Parameter function: This area shows the current password protection mode.
Parameter
operation
options
Turn off the password protection
Open the password protection, including file
protection and power-on password
File protection for users
Used to restrict the tester's modification
operations on the setting file
This soft key is used to modify the password.
Modify operation: after pressing this button,
enter the new password according to the
prompt on the screen. After inputting from the
keyboard, the screen prompts to confirm the
new password, repeat the new password, and
the password modification is completed.
Note: The factory default password is 2840.
4.1.2.6 Datetime
When moving to the datetime zone, you can modify the system time.
4.1.3 RS232
The general setting parameters of the serial port are: 8 data bits, 1 stop bit, no parity bit.
4.1.3.1 Buadrate
Parameter type: enumerated
Parameter function: used to select the baud rate of the built-in RS232 interface of the instrument.
To Next Page
Loading...
